TechNotesInfoBulletin_31.jpg

CLEANING MEDIA IN EVAPORATIVE COOLERS

2 MIN READ

Cambridge Air Solutions manufacturers evaporating coolers. Munters CELdek media is utilized in many of these coolers. Proper care of the media is a key element for maintaining safe, effective and efficient operation of the evaporative cooler. 

Engineering Bulletin MB-SCP-205 Controlling Scale and Dirt in Evaporative Pads

Munters has published Engineering Bulletin MB-SCP-205 Controlling Scale and Dirt in Evaporative Pads.

This bulletin covers topics including:

  1. Proper water distribution 
  2. On-off cycling of the pads 
  3. Common scale forming minerals 
  4. A quick reference chart showing stable water with respect to alkalinity (as CaCO3) and calcium hardness (as CaCO3) 
  5. Cleaning the sump and distribution system 

In addition, important formulae are included for: 

  1. Evaporative cooling 
  2. Water evaporative rate and bleed-off 
  3. Air flow 
     

Air Solutions Bulletin MB-ACC-205 Common Algae Treatment Chemicals

After cleaning and flushing the evaporative cooling system, according to Air Solutions Bulletin MB-SCP-205 Controlling Scale and Dirt in Evaporative Pads, the media can be treated with certain algae control chemicals. Munters has published Air Solutions Bulletin MB-ACC-205 Common Algae Treatment Chemicals.

This bulletin covers topics including the three most common chemical groups: 

  1. Quaternary amines 
  2. Oxidizing biocides 
  3. Copper compounds 

Combinations of these chemicals are found in many swimming pool chemicals and commercial disinfectants. When used continuously, or in too high of concentrations, these products can destroy wood, cellulose and metals. The methodology for calculating disinfectant dosages is shown, along with a table with maximum recommended dosages. 

Approved Chemicals for Cooling Pads

Another bulletin published by Munters is Approved Chemicals for Cooling Pads

This bulletin includes: 

  1. Approved algae control chemicals
  2. Physan 20, as manufactured by Maril Products, Inc.
  3. Triathlon, as manufactured by OHP, Inc. 
  4. Green-Shield, as manufactured by Whitmire Research Laboratories 
     

Cleaners and sanitizers 

  1. Aqua Max XL, as manufactured by Neogen Corporation
  2. Cool -N- Klean, as manufactured by Ivesco, LLC 
  3. Virocid or CID-20, as manufactured by BVS/CIDLines USA 
MB-ACP-205 Air Solutions Bulletin: Preventing Algae in Evaporative Cooling Pads

Munters has also published Air Solutions Bulletin MB-ACP-205 Preventing Algae in Evaporative Cooling Pads

This bulletin covers topics including: 

  1. Shade the pad and sump 
  2. Allow the pads to dry completely once every 24 hours 
  3. Minimize nutrient contamination Cambridge recommends that these engineering bulletins be considered as a basis for the proper maintenance of evaporative cooling pads.

Want to learn more about putting evaporative cooling in your facility? Find a Cambridge Manufacturing Representative in your area!

Rep Search

Please enter your information below so we can help you find the right rep for you.